← Back to the Xcontrol-P
Technical Data
Xcontrol-P – Technical Data
All technical data of the Xcontrol-P – the pneumatic control for SPINOGY motor spindles with automatic tool change. It switches release pressure, taper blow-off air and pneumatic return separately.
Overview
| Product | Xcontrol-P – pneumatic motor spindle control |
|---|---|
| Part no. | XM019 or XM029 |
| Required pressure | 6 to 10 bar |
| Voltage solenoid valves | 24 V DC |
| Power solenoid valves | 2.6 W |
| Weight | 4.0 kg |
| Dimensions (W × H × D) | 300 × 300 × 120 mm |
| Compatible with | SPINOGY motor spindles with automatic tool change (X22 / X30) |
| Manufacture | Development & manufacture in Weiterstadt, Germany (made in Germany) |
Pneumatic connections & pressures
| Port | Function | Pressure level | Connection |
|---|---|---|---|
| PIN | Connection to compressed-air network | 6 – 10 bar | NW7 |
| P1 | Release pressure (release tool) | 6 – 10 bar | Ø 6 mm |
| P2 | Taper blow-off air (clean taper) | 1 – 1.5 bar | Ø 6 mm |
| P3 | Pneum. return (clamp tool) | min. 3 bar | Ø 6 mm |
| POUT | Additional output (optional) | per filter regulator valve | Ø 6 mm |
| Drain | Condensate drain (filter regulator valve) | – | – |
Filter regulator valve
| Nominal flow rate | 900 l/min |
|---|---|
| Pressure control range | 0.5 – 12 bar |
| Operating temperature | −10 – 60 °C |
Pressure control valve (with solenoid)
| Nominal flow rate | 1,200 l/min |
|---|---|
| Pressure control range | 0.3 – 4 bar |
| Operating temperature | −10 – 60 °C |
Solenoid valves
| Valve | Function | Nominal flow rate | Voltage | Power |
|---|---|---|---|---|
| 5/2 | monostable | 700 l/min | 24 V DC | 2.6 W |
| 3/2 | closed, monostable | 700 l/min | 24 V DC | 2.6 W |
Operating temperature of both solenoid valves: −10 – 60 °C.
Pressure switch
| Function | monitors the minimum pressure level for releasing the tool |
|---|---|
| Switching threshold | < 6 bar → opens · > 6 bar → closes |
| Setting range | 1 – 10 bar |
| Switching voltage | 42 V |
| Switching frequency | 200 / min |
| Output function | NO contact |
| Operating temperature | −25 – 85 °C |
The pressure switch can be integrated into the emergency stop circuit so that the machine stops when the pressure is insufficient.
Electrical wiring
| Connection cable | 7-core (7G) |
|---|---|
| Wire 1 / 3 | 24 V / 0 V – solenoid valve taper blow-off air |
| Wire 2 / 4 | 24 V / 0 V – solenoid valve release pressure |
| Wire 5 / 6 | pressure switch contact |
| Yellow/Green | PE protective earth |
The Xcontrol-P can be integrated into the Xcontrol-E – valves and pressure switch are then supplied directly or integrated into the safety circuit.
Warranty
| Statutory warranty | 24 months |
|---|
Subject to technical changes and errors; the respective configuration is decisive.